Autor Tema: Necesito ayuda por favor  (Leído 466 veces)

Graham

  • Nuevo
  • *
  • Mensajes: 6
  • Karma: +0/-0
    • Ver Perfil
Necesito ayuda por favor
« en: Febrero 05, 2016, 04:42:47 pm »
Necesito ayuda por favor. Me parece que una vez en una serie de pasos que la fresa desplazada en la dirección x para una pasada y luego regresa a su ruta correcta. También a veces se olvida de elevar por encima de la trayectoria de la corriente antes de pasar al siguiente corte estropear la pieza de trabajo. ¿Puede alguien darme algunas ideas de dónde buscar como el G-Code se ve bien.

I need some help please.  I find that once in a set of passes the milling cutter displaces in the x direction for one pass then goes back to its correct route.  Also at times it forgets to raise above the current path before moving to the next cut spoiling the work piece.  Can anyone give me some ideas where to look as the G-Code looks OK.

Graham

Rideonbeat

  • Moderador Global
  • Aprendiz
  • *****
  • Mensajes: 328
  • Karma: +4/-0
    • Ver Perfil
  • Ubicación: Estado de México, México.
Re:Necesito ayuda por favor
« Respuesta #1 en: Febrero 05, 2016, 05:06:44 pm »
Can you post your gcode?

Graham

  • Nuevo
  • *
  • Mensajes: 6
  • Karma: +0/-0
    • Ver Perfil
Re:Necesito ayuda por favor
« Respuesta #2 en: Febrero 06, 2016, 01:14:19 pm »
Below is the G-Code.  The complete design is to make a loco wheel and it is split into 6 separate files.  So far I have only run the first two files and have problems with both so have not run the others as they are deeper cuts and if it goes off track it will break the cutter.

I am using V-Carve to create the design and export to G-Code using the the option Arcs (mm) (*.tap)

I am running the 2.4 beta 2 version of CNC Control.

T1M6
G17
G0Z20.320
G0X0.000Y0.000S12000M3
G0X28.921Y20.010Z5.080
G1Z-0.300F127.0
G1X28.891Y19.439Z-0.308
G1X28.799Y18.852Z-0.315
G1X28.638Y18.260Z-0.323
G1X28.406Y17.674Z-0.332
G1X28.102Y17.108Z-0.340
G1X27.730Y16.573Z-0.349
G1X27.294Y16.083Z-0.357
G1X26.803Y15.647Z-0.366
G1X26.268Y15.274Z-0.375
G1X25.702Y14.971Z-0.383
G1X25.116Y14.739Z-0.391
G1X24.524Y14.578Z-0.399
G1X23.938Y14.485Z-0.407
G1X23.366Y14.456Z-0.415
G1X22.715Y14.494Z-0.423
G1X22.064Y14.610Z-0.432
G1X21.427Y14.805Z-0.441
G1X20.818Y15.074Z-0.449
G1X20.250Y15.412Z-0.458
G1X19.732Y15.809Z-0.467
G1X20.250Y15.412Z-0.475
G1X20.818Y15.074Z-0.484
G1X21.427Y14.805Z-0.493
G1X22.064Y14.610Z-0.501
G1X22.715Y14.494Z-0.510
G1X23.366Y14.456Z-0.519
G1X23.938Y14.485Z-0.526
G1X24.524Y14.578Z-0.534
G1X25.116Y14.739Z-0.542
G1X25.702Y14.971Z-0.550
G1X26.268Y15.274Z-0.559
G1X26.803Y15.647Z-0.567
G1X27.294Y16.083Z-0.576
G1X27.730Y16.573Z-0.585
G1X28.102Y17.108Z-0.593
G1X28.406Y17.674Z-0.602
G1X28.638Y18.260Z-0.610
G1X28.799Y18.852Z-0.618
G1X28.891Y19.439Z-0.626
G1X28.921Y20.010Z-0.633
G2X23.366Y14.456I-5.555J0.000
G2X17.811Y20.010I0.000J5.555
G2X23.366Y25.565I5.555J0.000
G2X28.921Y20.010I0.000J-5.555
G1X29.721
G2X23.366Y13.656I-6.355J0.000
G2X17.011Y20.010I0.000J6.355
G2X23.366Y26.365I6.355J0.000
G2X29.721Y20.010I0.000J-6.355
G1X30.521
G2X23.366Y12.856I-7.155J0.000
G2X16.211Y20.010I0.000J7.155
G2X23.366Y27.165I7.155J0.000
G2X30.521Y20.010I0.000J-7.155
G1X31.321
G2X23.366Y12.056I-7.955J0.000
G2X15.411Y20.010I0.000J7.955
G2X23.366Y27.965I7.955J0.000
G2X31.321Y20.010I0.000J-7.955
G1X32.121
G2X23.366Y11.256I-8.755J0.000
G2X14.611Y20.010I0.000J8.755
G2X23.366Y28.765I8.755J0.000
G2X32.121Y20.010I0.000J-8.755
G0Z5.080
G0X32.923
G1Z-0.300F127.0
G1X32.889Y20.814Z-0.311
G1X32.784Y21.633Z-0.321
G1X32.604Y22.457Z-0.332
G1X32.347Y23.278Z-0.344
G1X32.012Y24.083Z-0.355
G1X31.599Y24.863Z-0.367
G1X31.114Y25.606Z-0.378
G1X30.560Y26.302Z-0.390
G1X29.945Y26.942Z-0.402
G1X29.278Y27.519Z-0.413
G1X28.568Y28.027Z-0.425
G1X27.827Y28.462Z-0.436
G1X27.064Y28.823Z-0.447
G1X26.289Y29.109Z-0.458
G1X25.514Y29.323Z-0.467
G1X26.289Y29.109Z-0.477
G1X27.064Y28.823Z-0.488
G1X27.827Y28.462Z-0.499
G1X28.568Y28.027Z-0.510
G1X29.278Y27.519Z-0.522
G1X29.945Y26.942Z-0.533
G1X30.560Y26.302Z-0.545
G1X31.114Y25.606Z-0.557
G1X31.599Y24.863Z-0.568
G1X32.012Y24.083Z-0.580
G1X32.347Y23.278Z-0.591
G1X32.604Y22.457Z-0.603
G1X32.784Y21.633Z-0.614
G1X32.889Y20.814Z-0.625
G1X32.923Y20.010Z-0.633
G3X23.366Y29.567I-9.557J0.000
G3X13.809Y20.010I0.000J-9.557
G3X23.366Y10.453I9.557J0.000
G3X32.923Y20.010I0.000J9.557
G1X33.723
G3X23.366Y30.367I-10.357J0.000
G3X13.009Y20.010I0.000J-10.357
G3X23.366Y9.653I10.357J0.000
G3X33.723Y20.010I0.000J10.357
G1X34.523
G3X23.366Y31.167I-11.157J0.000
G3X12.209Y20.010I0.000J-11.157
G3X23.366Y8.853I11.157J0.000
G3X34.523Y20.010I0.000J11.157
G1X35.323
G3X23.366Y31.967I-11.957J0.000
G3X11.409Y20.010I0.000J-11.957
G3X23.366Y8.053I11.957J0.000
G3X35.323Y20.010I0.000J11.957
G1X36.123
G3X23.366Y32.767I-12.757J0.000
G3X10.609Y20.010I0.000J-12.757
G3X23.366Y7.253I12.757J0.000
G3X36.123Y20.010I0.000J12.757
G0Z5.080
G0X28.921
G1Z-0.633F127.0
G1X28.891Y19.439Z-0.641
G1X28.799Y18.852Z-0.649
G1X28.638Y18.260Z-0.657
G1X28.406Y17.674Z-0.665
G1X28.102Y17.108Z-0.673
G1X27.730Y16.573Z-0.682
G1X27.294Y16.083Z-0.691
G1X26.803Y15.647Z-0.699
G1X26.268Y15.274Z-0.708
G1X25.702Y14.971Z-0.716
G1X25.116Y14.739Z-0.725
G1X24.524Y14.578Z-0.733
G1X23.938Y14.485Z-0.740
G1X23.366Y14.456Z-0.748
G1X22.715Y14.494Z-0.757
G1X22.064Y14.610Z-0.765
G1X21.427Y14.805Z-0.774
G1X20.818Y15.074Z-0.783
G1X20.250Y15.412Z-0.791
G1X19.732Y15.809Z-0.800
G1X20.250Y15.412Z-0.809
G1X20.818Y15.074Z-0.817
G1X21.427Y14.805Z-0.826
G1X22.064Y14.610Z-0.835
G1X22.715Y14.494Z-0.843
G1X23.366Y14.456Z-0.852
G1X23.938Y14.485Z-0.860
G1X24.524Y14.578Z-0.867
G1X25.116Y14.739Z-0.875
G1X25.702Y14.971Z-0.884
G1X26.268Y15.274Z-0.892
G1X26.803Y15.647Z-0.901
G1X27.294Y16.083Z-0.909
G1X27.730Y16.573Z-0.918
G1X28.102Y17.108Z-0.927
G1X28.406Y17.674Z-0.935
G1X28.638Y18.260Z-0.943
G1X28.799Y18.852Z-0.951
G1X28.891Y19.439Z-0.959
G1X28.921Y20.010Z-0.967
G2X23.366Y14.456I-5.555J0.000
G2X17.811Y20.010I0.000J5.555
G2X23.366Y25.565I5.555J0.000
G2X28.921Y20.010I0.000J-5.555
G1X29.721
G2X23.366Y13.656I-6.355J0.000
G2X17.011Y20.010I0.000J6.355
G2X23.366Y26.365I6.355J0.000
G2X29.721Y20.010I0.000J-6.355
G1X30.521
G2X23.366Y12.856I-7.155J0.000
G2X16.211Y20.010I0.000J7.155
G2X23.366Y27.165I7.155J0.000
G2X30.521Y20.010I0.000J-7.155
G1X31.321
G2X23.366Y12.056I-7.955J0.000
G2X15.411Y20.010I0.000J7.955
G2X23.366Y27.965I7.955J0.000
G2X31.321Y20.010I0.000J-7.955
G1X32.121
G2X23.366Y11.256I-8.755J0.000
G2X14.611Y20.010I0.000J8.755
G2X23.366Y28.765I8.755J0.000
G2X32.121Y20.010I0.000J-8.755
G0Z5.080
G0X32.923
G1Z-0.633F127.0
G1X32.889Y20.814Z-0.644
G1X32.784Y21.633Z-0.655
G1X32.604Y22.457Z-0.666
G1X32.347Y23.278Z-0.677
G1X32.012Y24.083Z-0.689
G1X31.599Y24.863Z-0.700
G1X31.114Y25.606Z-0.712
G1X30.560Y26.302Z-0.723
G1X29.945Y26.942Z-0.735
G1X29.278Y27.519Z-0.747
G1X28.568Y28.027Z-0.758
G1X27.827Y28.462Z-0.769
G1X27.064Y28.823Z-0.780
G1X26.289Y29.109Z-0.791
G1X25.514Y29.323Z-0.800
G1X26.289Y29.109Z-0.811
G1X27.064Y28.823Z-0.821
G1X27.827Y28.462Z-0.832
G1X28.568Y28.027Z-0.844
G1X29.278Y27.519Z-0.855
G1X29.945Y26.942Z-0.867
G1X30.560Y26.302Z-0.878
G1X31.114Y25.606Z-0.890
G1X31.599Y24.863Z-0.902
G1X32.012Y24.083Z-0.913
G1X32.347Y23.278Z-0.925
G1X32.604Y22.457Z-0.936
G1X32.784Y21.633Z-0.947
G1X32.889Y20.814Z-0.958
G1X32.923Y20.010Z-0.967
G3X23.366Y29.567I-9.557J0.000
G3X13.809Y20.010I0.000J-9.557
G3X23.366Y10.453I9.557J0.000
G3X32.923Y20.010I0.000J9.557
G1X33.723
G3X23.366Y30.367I-10.357J0.000
G3X13.009Y20.010I0.000J-10.357
G3X23.366Y9.653I10.357J0.000
G3X33.723Y20.010I0.000J10.357
G1X34.523
G3X23.366Y31.167I-11.157J0.000
G3X12.209Y20.010I0.000J-11.157
G3X23.366Y8.853I11.157J0.000
G3X34.523Y20.010I0.000J11.157
G1X35.323
G3X23.366Y31.967I-11.957J0.000
G3X11.409Y20.010I0.000J-11.957
G3X23.366Y8.053I11.957J0.000
G3X35.323Y20.010I0.000J11.957
G1X36.123
G3X23.366Y32.767I-12.757J0.000
G3X10.609Y20.010I0.000J-12.757
G3X23.366Y7.253I12.757J0.000
G3X36.123Y20.010I0.000J12.757
G0Z5.080
G0X28.921
G1Z-0.967F127.0
G1X28.891Y19.439Z-0.974
G1X28.799Y18.852Z-0.982
G1X28.638Y18.260Z-0.990
G1X28.406Y17.674Z-0.998
G1X28.102Y17.108Z-1.007
G1X27.730Y16.573Z-1.015
G1X27.294Y16.083Z-1.024
G1X26.803Y15.647Z-1.033
G1X26.268Y15.274Z-1.041
G1X25.702Y14.971Z-1.050
G1X25.116Y14.739Z-1.058
G1X24.524Y14.578Z-1.066
G1X23.938Y14.485Z-1.074
G1X23.366Y14.456Z-1.081
G1X22.715Y14.494Z-1.090
G1X22.064Y14.610Z-1.099
G1X21.427Y14.805Z-1.107
G1X20.818Y15.074Z-1.116
G1X20.250Y15.412Z-1.125
G1X19.732Y15.809Z-1.133
G1X20.250Y15.412Z-1.142
G1X20.818Y15.074Z-1.151
G1X21.427Y14.805Z-1.159
G1X22.064Y14.610Z-1.168
G1X22.715Y14.494Z-1.177
G1X23.366Y14.456Z-1.185
G1X23.938Y14.485Z-1.193
G1X24.524Y14.578Z-1.201
G1X25.116Y14.739Z-1.209
G1X25.702Y14.971Z-1.217
G1X26.268Y15.274Z-1.225
G1X26.803Y15.647Z-1.234
G1X27.294Y16.083Z-1.243
G1X27.730Y16.573Z-1.251
G1X28.102Y17.108Z-1.260
G1X28.406Y17.674Z-1.268
G1X28.638Y18.260Z-1.277
G1X28.799Y18.852Z-1.285
G1X28.891Y19.439Z-1.292
G1X28.921Y20.010Z-1.300
G2X23.366Y14.456I-5.555J0.000
G2X17.811Y20.010I0.000J5.555
G2X23.366Y25.565I5.555J0.000
G2X28.921Y20.010I0.000J-5.555
G1X29.721
G2X23.366Y13.656I-6.355J0.000
G2X17.011Y20.010I0.000J6.355
G2X23.366Y26.365I6.355J0.000
G2X29.721Y20.010I0.000J-6.355
G1X30.521
G2X23.366Y12.856I-7.155J0.000
G2X16.211Y20.010I0.000J7.155
G2X23.366Y27.165I7.155J0.000
G2X30.521Y20.010I0.000J-7.155
G1X31.321
G2X23.366Y12.056I-7.955J0.000
G2X15.411Y20.010I0.000J7.955
G2X23.366Y27.965I7.955J0.000
G2X31.321Y20.010I0.000J-7.955
G1X32.121
G2X23.366Y11.256I-8.755J0.000
G2X14.611Y20.010I0.000J8.755
G2X23.366Y28.765I8.755J0.000
G2X32.121Y20.010I0.000J-8.755
G0Z5.080
G0X32.923
G1Z-0.967F127.0
G1X32.889Y20.814Z-0.977
G1X32.784Y21.633Z-0.988
G1X32.604Y22.457Z-0.999
G1X32.347Y23.278Z-1.010
G1X32.012Y24.083Z-1.022
G1X31.599Y24.863Z-1.033
G1X31.114Y25.606Z-1.045
G1X30.560Y26.302Z-1.057
G1X29.945Y26.942Z-1.068
G1X29.278Y27.519Z-1.080
G1X28.568Y28.027Z-1.091
G1X27.827Y28.462Z-1.103
G1X27.064Y28.823Z-1.114
G1X26.289Y29.109Z-1.125
G1X25.514Y29.323Z-1.133
G1X26.289Y29.109Z-1.144
G1X27.064Y28.823Z-1.155
G1X27.827Y28.462Z-1.166
G1X28.568Y28.027Z-1.177
G1X29.278Y27.519Z-1.189
G1X29.945Y26.942Z-1.200
G1X30.560Y26.302Z-1.212
G1X31.114Y25.606Z-1.223
G1X31.599Y24.863Z-1.235
G1X32.012Y24.083Z-1.247
G1X32.347Y23.278Z-1.258
G1X32.604Y22.457Z-1.269
G1X32.784Y21.633Z-1.280
G1X32.889Y20.814Z-1.291
G1X32.923Y20.010Z-1.300
G3X23.366Y29.567I-9.557J0.000
G3X13.809Y20.010I0.000J-9.557
G3X23.366Y10.453I9.557J0.000
G3X32.923Y20.010I0.000J9.557
G1X33.723
G3X23.366Y30.367I-10.357J0.000
G3X13.009Y20.010I0.000J-10.357
G3X23.366Y9.653I10.357J0.000
G3X33.723Y20.010I0.000J10.357
G1X34.523
G3X23.366Y31.167I-11.157J0.000
G3X12.209Y20.010I0.000J-11.157
G3X23.366Y8.853I11.157J0.000
G3X34.523Y20.010I0.000J11.157
G1X35.323
G3X23.366Y31.967I-11.957J0.000
G3X11.409Y20.010I0.000J-11.957
G3X23.366Y8.053I11.957J0.000
G3X35.323Y20.010I0.000J11.957
G1X36.123
G3X23.366Y32.767I-12.757J0.000
G3X10.609Y20.010I0.000J-12.757
G3X23.366Y7.253I12.757J0.000
G3X36.123Y20.010I0.000J12.757
G0Z5.080
G0X71.876Y19.686
G1Z-0.300F127.0
G1X71.847Y19.115Z-0.308
G1X71.754Y18.528Z-0.315
G1X71.593Y17.936Z-0.323
G1X71.361Y17.350Z-0.332
G1X71.057Y16.784Z-0.340
G1X70.685Y16.249Z-0.349
G1X70.249Y15.758Z-0.357
G1X69.759Y15.323Z-0.366
G1X69.224Y14.950Z-0.375
G1X68.657Y14.646Z-0.383
G1X68.072Y14.414Z-0.391
G1X67.480Y14.254Z-0.399
G1X66.893Y14.161Z-0.407
G1X66.321Y14.131Z-0.415
G1X65.671Y14.170Z-0.423
G1X65.020Y14.286Z-0.432
G1X64.383Y14.481Z-0.441
G1X63.774Y14.750Z-0.449
G1X63.205Y15.088Z-0.458
G1X62.688Y15.485Z-0.467
G1X63.205Y15.088Z-0.475
G1X63.774Y14.750Z-0.484
G1X64.383Y14.481Z-0.493
G1X65.020Y14.286Z-0.501
G1X65.671Y14.170Z-0.510
G1X66.321Y14.131Z-0.519
G1X66.893Y14.161Z-0.526
G1X67.480Y14.254Z-0.534
G1X68.072Y14.414Z-0.542
G1X68.657Y14.646Z-0.550
G1X69.224Y14.950Z-0.559
G1X69.759Y15.323Z-0.567
G1X70.249Y15.758Z-0.576
G1X70.685Y16.249Z-0.585
G1X71.057Y16.784Z-0.593
G1X71.361Y17.350Z-0.602
G1X71.593Y17.936Z-0.610
G1X71.754Y18.528Z-0.618
G1X71.847Y19.115Z-0.626
G1X71.876Y19.686Z-0.633
G2X66.321Y14.131I-5.555J0.000
G2X60.767Y19.686I0.000J5.555
G2X66.321Y25.241I5.555J0.000
G2X71.876Y19.686I0.000J-5.555
G1X72.676
G2X66.321Y13.331I-6.355J0.000
G2X59.967Y19.686I0.000J6.355
G2X66.321Y26.041I6.355J0.000
G2X72.676Y19.686I0.000J-6.355
G1X73.476
G2X66.321Y12.531I-7.155J0.000
G2X59.167Y19.686I0.000J7.155
G2X66.321Y26.841I7.155J0.000
G2X73.476Y19.686I0.000J-7.155
G1X74.276
G2X66.321Y11.731I-7.955J0.000
G2X58.367Y19.686I0.000J7.955
G2X66.321Y27.641I7.955J0.000
G2X74.276Y19.686I0.000J-7.955
G1X75.076
G2X66.321Y10.931I-8.755J0.000
G2X57.567Y19.686I0.000J8.755
G2X66.321Y28.441I8.755J0.000
G2X75.076Y19.686I0.000J-8.755
G0Z5.080
G0X75.878
G1Z-0.300F127.0
G1X75.844Y20.490Z-0.311
G1X75.740Y21.308Z-0.321
G1X75.560Y22.133Z-0.332
G1X75.302Y22.953Z-0.344
G1X74.967Y23.759Z-0.355
G1X74.555Y24.539Z-0.367
G1X74.069Y25.282Z-0.378
G1X73.515Y25.978Z-0.390
G1X72.900Y26.618Z-0.402
G1X72.233Y27.195Z-0.413
G1X71.524Y27.703Z-0.425
G1X70.782Y28.138Z-0.436
G1X70.019Y28.499Z-0.447
G1X69.245Y28.785Z-0.458
G1X68.469Y28.999Z-0.467
G1X69.245Y28.785Z-0.477
G1X70.019Y28.499Z-0.488
G1X70.782Y28.138Z-0.499
G1X71.524Y27.703Z-0.510
G1X72.233Y27.195Z-0.522
G1X72.900Y26.618Z-0.533
G1X73.515Y25.978Z-0.545
G1X74.069Y25.282Z-0.557
G1X74.555Y24.539Z-0.568
G1X74.967Y23.759Z-0.580
G1X75.302Y22.953Z-0.591
G1X75.560Y22.133Z-0.603
G1X75.740Y21.308Z-0.614
G1X75.844Y20.490Z-0.625
G1X75.878Y19.686Z-0.633
G3X66.321Y29.243I-9.557J0.000
G3X56.764Y19.686I0.000J-9.557
G3X66.321Y10.129I9.557J0.000
G3X75.878Y19.686I0.000J9.557
G1X76.678
G3X66.321Y30.043I-10.357J0.000
G3X55.964Y19.686I0.000J-10.357
G3X66.321Y9.329I10.357J0.000
G3X76.678Y19.686I0.000J10.357
G1X77.478
G3X66.321Y30.843I-11.157J0.000
G3X55.164Y19.686I0.000J-11.157
G3X66.321Y8.529I11.157J0.000
G3X77.478Y19.686I0.000J11.157
G1X78.278
G3X66.321Y31.643I-11.957J0.000
G3X54.364Y19.686I0.000J-11.957
G3X66.321Y7.729I11.957J0.000
G3X78.278Y19.686I0.000J11.957
G1X79.078
G3X66.321Y32.443I-12.757J0.000
G3X53.564Y19.686I0.000J-12.757
G3X66.321Y6.929I12.757J0.000
G3X79.078Y19.686I0.000J12.757
G0Z5.080
G0X71.876
G1Z-0.633F127.0
G1X71.847Y19.115Z-0.641
G1X71.754Y18.528Z-0.649
G1X71.593Y17.936Z-0.657
G1X71.361Y17.350Z-0.665
G1X71.057Y16.784Z-0.673
G1X70.685Y16.249Z-0.682
G1X70.249Y15.758Z-0.691
G1X69.759Y15.323Z-0.699
G1X69.224Y14.950Z-0.708
G1X68.657Y14.646Z-0.716
G1X68.072Y14.414Z-0.725
G1X67.480Y14.254Z-0.733
G1X66.893Y14.161Z-0.740
G1X66.321Y14.131Z-0.748
G1X65.671Y14.170Z-0.757
G1X65.020Y14.286Z-0.765
G1X64.383Y14.481Z-0.774
G1X63.774Y14.750Z-0.783
G1X63.205Y15.088Z-0.791
G1X62.688Y15.485Z-0.800
G1X63.205Y15.088Z-0.809
G1X63.774Y14.750Z-0.817
G1X64.383Y14.481Z-0.826
G1X65.020Y14.286Z-0.835
G1X65.671Y14.170Z-0.843
G1X66.321Y14.131Z-0.852
G1X66.893Y14.161Z-0.860
G1X67.480Y14.254Z-0.867
G1X68.072Y14.414Z-0.875
G1X68.657Y14.646Z-0.884
G1X69.224Y14.950Z-0.892
G1X69.759Y15.323Z-0.901
G1X70.249Y15.758Z-0.909
G1X70.685Y16.249Z-0.918
G1X71.057Y16.784Z-0.927
G1X71.361Y17.350Z-0.935
G1X71.593Y17.936Z-0.943
G1X71.754Y18.528Z-0.951
G1X71.847Y19.115Z-0.959
G1X71.876Y19.686Z-0.967
G2X66.321Y14.131I-5.555J0.000
G2X60.767Y19.686I0.000J5.555
G2X66.321Y25.241I5.555J0.000
G2X71.876Y19.686I0.000J-5.555
G1X72.676
G2X66.321Y13.331I-6.355J0.000
G2X59.967Y19.686I0.000J6.355
G2X66.321Y26.041I6.355J0.000
G2X72.676Y19.686I0.000J-6.355
G1X73.476
G2X66.321Y12.531I-7.155J0.000
G2X59.167Y19.686I0.000J7.155
G2X66.321Y26.841I7.155J0.000
G2X73.476Y19.686I0.000J-7.155
G1X74.276
G2X66.321Y11.731I-7.955J0.000
G2X58.367Y19.686I0.000J7.955
G2X66.321Y27.641I7.955J0.000
G2X74.276Y19.686I0.000J-7.955
G1X75.076
G2X66.321Y10.931I-8.755J0.000
G2X57.567Y19.686I0.000J8.755
G2X66.321Y28.441I8.755J0.000
G2X75.076Y19.686I0.000J-8.755
G0Z5.080
G0X75.878
G1Z-0.633F127.0
G1X75.844Y20.490Z-0.644
G1X75.740Y21.308Z-0.655
G1X75.560Y22.133Z-0.666
G1X75.302Y22.953Z-0.677
G1X74.967Y23.759Z-0.689
G1X74.555Y24.539Z-0.700
G1X74.069Y25.282Z-0.712
G1X73.515Y25.978Z-0.723
G1X72.900Y26.618Z-0.735
G1X72.233Y27.195Z-0.747
G1X71.524Y27.703Z-0.758
G1X70.782Y28.138Z-0.769
G1X70.019Y28.499Z-0.780
G1X69.245Y28.785Z-0.791
G1X68.469Y28.999Z-0.800
G1X69.245Y28.785Z-0.811
G1X70.019Y28.499Z-0.821
G1X70.782Y28.138Z-0.832
G1X71.524Y27.703Z-0.844
G1X72.233Y27.195Z-0.855
G1X72.900Y26.618Z-0.867
G1X73.515Y25.978Z-0.878
G1X74.069Y25.282Z-0.890
G1X74.555Y24.539Z-0.902
G1X74.967Y23.759Z-0.913
G1X75.302Y22.953Z-0.925
G1X75.560Y22.133Z-0.936
G1X75.740Y21.308Z-0.947
G1X75.844Y20.490Z-0.958
G1X75.878Y19.686Z-0.967
G3X66.321Y29.243I-9.557J0.000
G3X56.764Y19.686I0.000J-9.557
G3X66.321Y10.129I9.557J0.000
G3X75.878Y19.686I0.000J9.557
G1X76.678
G3X66.321Y30.043I-10.357J0.000
G3X55.964Y19.686I0.000J-10.357
G3X66.321Y9.329I10.357J0.000
G3X76.678Y19.686I0.000J10.357
G1X77.478
G3X66.321Y30.843I-11.157J0.000
G3X55.164Y19.686I0.000J-11.157
G3X66.321Y8.529I11.157J0.000
G3X77.478Y19.686I0.000J11.157
G1X78.278
G3X66.321Y31.643I-11.957J0.000
G3X54.364Y19.686I0.000J-11.957
G3X66.321Y7.729I11.957J0.000
G3X78.278Y19.686I0.000J11.957
G1X79.078
G3X66.321Y32.443I-12.757J0.000
G3X53.564Y19.686I0.000J-12.757
G3X66.321Y6.929I12.757J0.000
G3X79.078Y19.686I0.000J12.757
G0Z5.080
G0X71.876
G1Z-0.967F127.0
G1X71.847Y19.115Z-0.974
G1X71.754Y18.528Z-0.982
G1X71.593Y17.936Z-0.990
G1X71.361Y17.350Z-0.998
G1X71.057Y16.784Z-1.007
G1X70.685Y16.249Z-1.015
G1X70.249Y15.758Z-1.024
G1X69.759Y15.323Z-1.033
G1X69.224Y14.950Z-1.041
G1X68.657Y14.646Z-1.050
G1X68.072Y14.414Z-1.058
G1X67.480Y14.254Z-1.066
G1X66.893Y14.161Z-1.074
G1X66.321Y14.131Z-1.081
G1X65.671Y14.170Z-1.090
G1X65.020Y14.286Z-1.099
G1X64.383Y14.481Z-1.107
G1X63.774Y14.750Z-1.116
G1X63.205Y15.088Z-1.125
G1X62.688Y15.485Z-1.133
G1X63.205Y15.088Z-1.142
G1X63.774Y14.750Z-1.151
G1X64.383Y14.481Z-1.159
G1X65.020Y14.286Z-1.168
G1X65.671Y14.170Z-1.177
G1X66.321Y14.131Z-1.185
G1X66.893Y14.161Z-1.193
G1X67.480Y14.254Z-1.201
G1X68.072Y14.414Z-1.209
G1X68.657Y14.646Z-1.217
G1X69.224Y14.950Z-1.225
G1X69.759Y15.323Z-1.234
G1X70.249Y15.758Z-1.243
G1X70.685Y16.249Z-1.251
G1X71.057Y16.784Z-1.260
G1X71.361Y17.350Z-1.268
G1X71.593Y17.936Z-1.277
G1X71.754Y18.528Z-1.285
G1X71.847Y19.115Z-1.292
G1X71.876Y19.686Z-1.300
G2X66.321Y14.131I-5.555J0.000
G2X60.767Y19.686I0.000J5.555
G2X66.321Y25.241I5.555J0.000
G2X71.876Y19.686I0.000J-5.555
G1X72.676
G2X66.321Y13.331I-6.355J0.000
G2X59.967Y19.686I0.000J6.355
G2X66.321Y26.041I6.355J0.000
G2X72.676Y19.686I0.000J-6.355
G1X73.476
G2X66.321Y12.531I-7.155J0.000
G2X59.167Y19.686I0.000J7.155
G2X66.321Y26.841I7.155J0.000
G2X73.476Y19.686I0.000J-7.155
G1X74.276
G2X66.321Y11.731I-7.955J0.000
G2X58.367Y19.686I0.000J7.955
G2X66.321Y27.641I7.955J0.000
G2X74.276Y19.686I0.000J-7.955
G1X75.076
G2X66.321Y10.931I-8.755J0.000
G2X57.567Y19.686I0.000J8.755
G2X66.321Y28.441I8.755J0.000
G2X75.076Y19.686I0.000J-8.755
G0Z5.080
G0X75.878
G1Z-0.967F127.0
G1X75.844Y20.490Z-0.977
G1X75.740Y21.308Z-0.988
G1X75.560Y22.133Z-0.999
G1X75.302Y22.953Z-1.010
G1X74.967Y23.759Z-1.022
G1X74.555Y24.539Z-1.033
G1X74.069Y25.282Z-1.045
G1X73.515Y25.978Z-1.057
G1X72.900Y26.618Z-1.068
G1X72.233Y27.195Z-1.080
G1X71.524Y27.703Z-1.091
G1X70.782Y28.138Z-1.103
G1X70.019Y28.499Z-1.114
G1X69.245Y28.785Z-1.125
G1X68.469Y28.999Z-1.133
G1X69.245Y28.785Z-1.144
G1X70.019Y28.499Z-1.155
G1X70.782Y28.138Z-1.166
G1X71.524Y27.703Z-1.177
G1X72.233Y27.195Z-1.189
G1X72.900Y26.618Z-1.200
G1X73.515Y25.978Z-1.212
G1X74.069Y25.282Z-1.223
G1X74.555Y24.539Z-1.235
G1X74.967Y23.759Z-1.247
G1X75.302Y22.953Z-1.258
G1X75.560Y22.133Z-1.269
G1X75.740Y21.308Z-1.280
G1X75.844Y20.490Z-1.291
G1X75.878Y19.686Z-1.300
G3X66.321Y29.243I-9.557J0.000
G3X56.764Y19.686I0.000J-9.557
G3X66.321Y10.129I9.557J0.000
G3X75.878Y19.686I0.000J9.557
G1X76.678
G3X66.321Y30.043I-10.357J0.000
G3X55.964Y19.686I0.000J-10.357
G3X66.321Y9.329I10.357J0.000
G3X76.678Y19.686I0.000J10.357
G1X77.478
G3X66.321Y30.843I-11.157J0.000
G3X55.164Y19.686I0.000J-11.157
G3X66.321Y8.529I11.157J0.000
G3X77.478Y19.686I0.000J11.157
G1X78.278
G3X66.321Y31.643I-11.957J0.000
G3X54.364Y19.686I0.000J-11.957
G3X66.321Y7.729I11.957J0.000
G3X78.278Y19.686I0.000J11.957
G1X79.078
G3X66.321Y32.443I-12.757J0.000
G3X53.564Y19.686I0.000J-12.757
G3X66.321Y6.929I12.757J0.000
G3X79.078Y19.686I0.000J12.757
G0Z5.080
G0Z20.320
G0X0.000Y0.000
M30

Rideonbeat

  • Moderador Global
  • Aprendiz
  • *****
  • Mensajes: 328
  • Karma: +4/-0
    • Ver Perfil
  • Ubicación: Estado de México, México.
Re:Necesito ayuda por favor
« Respuesta #3 en: Febrero 06, 2016, 07:59:05 pm »
Well, the gcode looks fine, no weird moves so the problem it isn't on it (you can use a tool named CAMotics to simulate the gcode and check for errors before send it to your cnc, http://camotics.org)

The weird thing happening here it's that your machine is correcting it self after the strange move, that should not happen, when a machine comes out of the right path their next moves are always out too. Usually this false moves come from hardware bad connections, the firmware or software does not have a way to know when this happens, when the spindle does not rise it usually happens because of this bad connections, it also may happen because a bad configuration on firmware, like an acceleration setting too high, if the motor can handle the acceleration it just not move.

¿can you please share your setup of hardware, firmware and software?

Sorry if i made a mistake when i write, i learn english just seeing movies, so... sorry again.

altrote

  • Nuevo
  • *
  • Mensajes: 46
  • Karma: +1/-0
    • Ver Perfil
  • Ubicación: valencia
Re:Necesito ayuda por favor
« Respuesta #4 en: Febrero 06, 2016, 08:14:15 pm »
De lujo ,a los que no sabemos ingles ya nos hemos enterado %-}
« Última modificación: Febrero 06, 2016, 08:21:51 pm por altrote »

Graham

  • Nuevo
  • *
  • Mensajes: 6
  • Karma: +0/-0
    • Ver Perfil
Re:Necesito ayuda por favor
« Respuesta #5 en: Febrero 07, 2016, 12:03:55 pm »
Hola, Rideonbeat, your English is excellent  :)

V-Carve to create the design and export to G-Code using the the option Arcs (mm) (*.tap)
2.4 beta 2 version of CNC Control.
Firmware cnc-controller Version 1.0.16 - I think  I have switched to Grbl in the CNC ption window but makes no difference to the problem.
Hardware arduino-1.6.6-windows (? maybe 1.6.7)

When I first started to use the system I would get "Emergency Stop" shown on the screen but I don't have one! It was suggested that I reconfigure part of the firmware as said below.  Maybe this is the problem and I have no idea how to find the config.h file  :gritar:

If you have the firmware 1.0.15 and have no limit switches you will have to disable them in the archive config.h setting its value to 0 and recompile.

find the following lines in the  config.h  file and put your pin 0

// X axis configuration
X_MIN_PIN 0 // #define min detection switch PIN
X_MAX_PIN 0 // #define max detection switch PIN

// Y axis configuration
Y_MIN_PIN 0 // #define min detection switch PIN
Y_MAX_PIN 0 // #define max detection switch PIN

// Z axis configuration
Z_MIN_PIN 0 // #define min detection switch PIN
Z_MAX_PIN 0 // #define max detection switch PIN


Emergency EMERGENCY_PIN 0 // #define pin Control button

rego

  • Aprendiz
  • **
  • Mensajes: 821
  • Karma: +5/-0
    • Ver Perfil
  • Ubicación: Villanueva de Castellon (Valencia)
Re:Necesito ayuda por favor
« Respuesta #6 en: Febrero 07, 2016, 04:09:14 pm »
Altrote, lo que no aprendamos en este foro no lo vamos aprender en ningun lado, esto quiere decir que este foro es de los mejores de la red  a nivel mundial :)) :)) :)) :)) :))

Rideonbeat

  • Moderador Global
  • Aprendiz
  • *****
  • Mensajes: 328
  • Karma: +4/-0
    • Ver Perfil
  • Ubicación: Estado de México, México.
Re:Necesito ayuda por favor
« Respuesta #7 en: Febrero 07, 2016, 06:48:28 pm »
Hola, Rideonbeat, your English is excellent  :)

V-Carve to create the design and export to G-Code using the the option Arcs (mm) (*.tap)
2.4 beta 2 version of CNC Control.
Firmware cnc-controller Version 1.0.16 - I think  I have switched to Grbl in the CNC ption window but makes no difference to the problem.
Hardware arduino-1.6.6-windows (? maybe 1.6.7)

When I first started to use the system I would get "Emergency Stop" shown on the screen but I don't have one! It was suggested that I reconfigure part of the firmware as said below.  Maybe this is the problem and I have no idea how to find the config.h file  :gritar:

If you have the firmware 1.0.15 and have no limit switches you will have to disable them in the archive config.h setting its value to 0 and recompile.

find the following lines in the  config.h  file and put your pin 0

// X axis configuration
X_MIN_PIN 0 // #define min detection switch PIN
X_MAX_PIN 0 // #define max detection switch PIN

// Y axis configuration
Y_MIN_PIN 0 // #define min detection switch PIN
Y_MAX_PIN 0 // #define max detection switch PIN

// Z axis configuration
Z_MIN_PIN 0 // #define min detection switch PIN
Z_MAX_PIN 0 // #define max detection switch PIN


Emergency EMERGENCY_PIN 0 // #define pin Control button

First recommendation, change your Arduino firmware to GRBL, it may solve your problem, i remember my self having some problems with 1.0.16 firmware too, like omitted instructions.
« Última modificación: Febrero 07, 2016, 06:53:40 pm por Rideonbeat »

altrote

  • Nuevo
  • *
  • Mensajes: 46
  • Karma: +1/-0
    • Ver Perfil
  • Ubicación: valencia
Re:Necesito ayuda por favor
« Respuesta #8 en: Febrero 07, 2016, 08:48:29 pm »
Rego, en eso tienes razón :)
Si quiero enterarme ,tendré que utilizar el maravilloso traductor de google  ó aprender ingles aunque a estas alturas lo veo dificil :'(
en fin no pasa nada y que nadie se moleste  :)

Graham

  • Nuevo
  • *
  • Mensajes: 6
  • Karma: +0/-0
    • Ver Perfil
Re:Necesito ayuda por favor
« Respuesta #9 en: Febrero 08, 2016, 08:56:42 am »
Thank you very much gentlemen, I shall change the firmware as suggested.  Do I just change it in the Configuration, General, location and what do I need to do in the GRBL location?

Gracias mucho señores, debo cambiar el firmware como se sugiere. ¿Puede simplemente cambiar la ubicación General, configuración, y lo que tengo que hacer en el lugar de GRBL?

It will be some time before I can make the changes and see if that solves the problem as I am now back at work in South Africa for a few weeks.  I know the machine translators can produce strange and sometimes comical results so I hope it is possible to understand what I am trying to say.  :D

Será un tiempo antes de hacer los cambios y ver si eso soluciona el problema, ahora estoy en el trabajo en Sudáfrica durante unas semanas. Sé que los traductores de la máquina pueden producir resultados extraños y a veces cómicos así que espero que sea posible entender lo que trato de decir.

Saludos

Graham

Rideonbeat

  • Moderador Global
  • Aprendiz
  • *****
  • Mensajes: 328
  • Karma: +4/-0
    • Ver Perfil
  • Ubicación: Estado de México, México.
Re:Necesito ayuda por favor
« Respuesta #10 en: Septiembre 18, 2016, 03:17:19 am »
Hi friend, i'm curious, any news?