Autor Tema: Tema Movido de Programas de diseño CAD/CAM: Como crear letras bajo relieve  (Leído 2872 veces)

ngc1300

  • Administrador
  • Usuario de CNCs
  • *****
  • Mensajes: 2869
  • Karma: +45/-2
    • Ver Perfil
    • cncControl
  • Ubicación: Terrassa
Re:Tema Movido de Programas de diseño CAD/CAM: Como crear letras bajo relieve
« Respuesta #15 en: Junio 24, 2015, 04:02:53 pm »
Envíame un archivo de ejemplo que no muestre el dibujo para que ver que esta pasando, a mi me muestra bien todos los gcodes que le pongo

Gabrielle2015

  • Nuevo
  • *
  • Mensajes: 48
  • Karma: +0/-0
    • Ver Perfil
  • Ubicación: italia
Re:Tema Movido de Programas de diseño CAD/CAM: Como crear letras bajo relieve
« Respuesta #16 en: Junio 24, 2015, 04:42:01 pm »
%
(Header)
(Generated by gcodetools from Inkscape.)
(Using default header. To add your own header create file "header" in the output dir.)
M3
(Header end.)
G21 (All units in mm)

(Footer)
M5
G00 X0.0000 Y0.0000
M2
(Using default footer. To add your own footer create file "footer" in the output dir.)
(end)
%

ngc1300

  • Administrador
  • Usuario de CNCs
  • *****
  • Mensajes: 2869
  • Karma: +45/-2
    • Ver Perfil
    • cncControl
  • Ubicación: Terrassa
Re:Tema Movido de Programas de diseño CAD/CAM: Como crear letras bajo relieve
« Respuesta #17 en: Junio 24, 2015, 05:20:06 pm »
este gcode no tiene nada que dibujar lo único que hace es ir a la posición X0 Y0

Gabrielle2015

  • Nuevo
  • *
  • Mensajes: 48
  • Karma: +0/-0
    • Ver Perfil
  • Ubicación: italia
Re:Tema Movido de Programas de diseño CAD/CAM: Como crear letras bajo relieve
« Respuesta #18 en: Junio 24, 2015, 05:35:02 pm »
sigo todos los pasos,e leido los tutoriales, logre hacer uno y ese logro andar pero solo uno.
%
(Header)
(Generated by gcodetools from Inkscape.)
(Using default header. To add your own header create file "header" in the output dir.)
M3
(Header end.)
G21

(Start cutting path id: path4283)
(Change tool to Default tool)

G00 Z5.000000
G00 X102.392962 Y24.305435

G01 Z-0.125000 F100.0
G02 X101.948475 Y14.509986 Z-0.125000 I-108.156717 J0.000000 F400.000000
G02 X100.978801 Y8.755107 Z-0.125000 I-38.155195 J3.469868
G02 X98.863246 Y3.951175 Z-0.125000 I-14.912486 J3.699369
G02 X97.190876 Y3.054519 Z-0.125000 I-1.672370 J1.111256
G02 X95.502808 Y3.956927 Z-0.125000 I0.000000 J2.030076
G02 X93.382749 Y8.755107 Z-0.125000 I12.677944 J8.469163
G02 X92.420051 Y14.509230 Z-0.125000 I37.440237 J9.221564
G02 X91.978694 Y24.305435 Z-0.125000 I108.495865 J9.796205
G02 X92.420051 Y34.101622 Z-0.125000 I108.936889 J-0.000000
G02 X93.382749 Y39.855745 Z-0.125000 I38.402962 J-3.467448
G02 X95.505305 Y44.688181 Z-0.125000 I14.956371 J-3.686936
G02 X97.190876 Y45.592410 Z-0.125000 I1.685571 J-1.118919
G02 X98.860773 Y44.693955 Z-0.125000 I0.000000 J-2.001090
G02 X100.978801 Y39.855745 Z-0.125000 I-12.954255 J-8.553706
G02 X101.948476 Y34.100865 Z-0.125000 I-37.185547 J-9.224754
G02 X102.392962 Y24.305435 Z-0.125000 I-107.711900 J-9.795430
G01 X102.392962 Y24.305435 Z-0.125000
G00 Z5.000000

(End cutting path id: path4283)


(Start cutting path id: path4283)
(Change tool to Default tool)

G00 Z5.000000
G00 X100.433343 Y24.305435

G01 Z-0.125000 F100.0
G03 X100.145615 Y32.102518 Z-0.125000 I-105.789587 J-0.000000 F400.000000
G03 X99.574745 Y35.923075 Z-0.125000 I-25.861153 J-1.911261
G03 X98.246980 Y39.161337 Z-0.125000 I-10.194743 J-2.288752
G03 X97.190876 Y39.747513 Z-0.125000 I-1.056104 J-0.658297
G03 X96.119313 Y39.155413 Z-0.125000 I-0.000000 J-1.265690
G03 X94.786810 Y35.923075 Z-0.125000 I8.739044 J-5.493418
G03 X94.222692 Y32.103258 Z-0.125000 I25.579880 J-5.729252
G03 X93.938312 Y24.305435 Z-0.125000 I106.767881 J-7.797823
G03 X94.219402 Y16.759024 Z-0.125000 I101.439855 J-0.000000
G03 X94.796910 Y12.796027 Z-0.125000 I28.450760 J2.122418
G03 X96.131604 Y9.491843 Z-0.125000 I10.466731 J2.306277
G03 X97.190876 Y8.899416 Z-0.125000 I1.059271 J0.650786
G03 X98.237003 Y9.484238 Z-0.125000 I0.000000 J1.228065
G03 X99.564645 Y12.759950 Z-0.125000 I-9.098580 J5.594545
G03 X100.147177 Y16.688054 Z-0.125000 I-26.892519 J5.995366
G03 X100.433343 Y24.305435 Z-0.125000 I-101.239212 J7.617381
G01 X100.433343 Y24.305435 Z-0.125000
G00 Z5.000000

(End cutting path id: path4283)


(Start cutting path id: path4281)
(Change tool to Default tool)

G00 Z5.000000
G00 X89.200885 Y51.220843

G01 Z-0.125000 F100.0
G01 X87.059442 Y51.220843 Z-0.125000 F400.000000
G01 X87.059442 Y58.256366 Z-0.125000
G01 X89.200885 Y58.256366 Z-0.125000
G01 X89.200885 Y51.220843 Z-0.125000
G01 X89.200885 Y51.220843 Z-0.125000
G00 Z5.000000

(End cutting path id: path4281)


(Start cutting path id: path4281)
(Change tool to Default tool)

G00 Z5.000000
G00 X89.079669 Y4.172990

G01 Z-0.125000 F100.0
G01 X87.180658 Y4.172990 Z-0.125000 F400.000000
G01 X87.180658 Y44.473939 Z-0.125000
G01 X89.079669 Y44.473939 Z-0.125000
G01 X89.079669 Y4.172990 Z-0.125000
G01 X89.079669 Y4.172990 Z-0.125000
G00 Z5.000000

(End cutting path id: path4281)


(Start cutting path id: path4279)
(Change tool to Default tool)

G00 Z5.000000
G00 X85.352351 Y37.077624

G01 Z-0.125000 F100.0
G01 X85.251341 Y37.077624 Z-0.125000 F400.000000
G03 X84.805110 Y37.400372 Z-0.125000 I-2.273012 J-2.672811
G03 X84.423045 Y37.582743 Z-0.125000 I-1.079562 J-1.770269
G03 X84.018008 Y37.712356 Z-0.125000 I-0.740445 J-1.616202
G03 X83.483643 Y37.763222 Z-0.125000 I-0.534365 J-2.781396
G03 X82.755851 Y37.500736 Z-0.125000 I0.000000 J-1.140212
G03 X81.786653 Y36.356114 Z-0.125000 I2.735092 J-3.298555
G03 X81.057226 Y34.943877 Z-0.125000 I11.143024 J-6.649919
G03 X80.210873 Y32.784236 Z-0.125000 I25.283469 J-11.154123
G01 X80.210873 Y4.173083 Z-0.125000
G01 X78.311863 Y4.173083 Z-0.125000
G01 X78.311863 Y44.474031 Z-0.125000
G01 X80.210873 Y44.474031 Z-0.125000
G01 X80.210873 Y38.520902 Z-0.125000
G02 X81.457624 Y41.711823 Z-0.125000 I43.462194 J-15.142431
G02 X82.200798 Y43.103019 Z-0.125000 I8.948316 J-3.886081
G02 X83.211996 Y44.215046 Z-0.125000 I3.684200 J-2.334376
G02 X83.968497 Y44.474031 Z-0.125000 I0.756501 J-0.975386
G02 X84.455032 Y44.437519 Z-0.125000 I0.000000 J-3.259903
G02 X84.685678 Y44.365781 Z-0.125000 I-0.119246 J-0.790028
G02 X84.901347 Y44.278699 Z-0.125000 I-0.517692 J-1.592750
G02 X85.352351 Y44.041066 Z-0.125000 I-3.523003 J-7.233101
G01 X85.352351 Y37.077698 Z-0.125000
G01 X85.352351 Y37.077624 Z-0.125000
G00 Z5.000000

(End cutting path id: path4279)


(Start cutting path id: path4277)
(Change tool to Default tool)

G00 Z5.000000
G00 X74.635049 Y4.172990

G01 Z-0.125000 F100.0
G01 X72.746139 Y4.172990 Z-0.125000 F400.000000
G01 X72.746139 Y8.466470 Z-0.125000
G03 X72.497607 Y7.851520 Z-0.125000 I47.267910 J-19.461031
G03 X72.059259 Y6.734647 Z-0.125000 I155.484420 J-61.668589
G02 X71.597260 Y5.671196 Z-0.125000 I-14.878747 J5.831752
G02 X71.230968 Y5.002824 Z-0.125000 I-6.229345 J2.979354
G02 X70.699603 Y4.219227 Z-0.125000 I-5.395689 J3.086911
G02 X70.140048 Y3.631793 Z-0.125000 I-3.571729 J2.842000
G02 X69.465333 Y3.202637 Z-0.125000 I-1.475739 J1.575174
G02 X68.695586 Y3.054519 Z-0.125000 I-0.769747 J1.926070
G02 X67.593790 Y3.620402 Z-0.125000 I0.000000 J1.355560
G02 X66.109696 Y6.662474 Z-0.125000 I8.227858 J5.897062
G02 X65.367723 Y10.316312 Z-0.125000 I20.927253 J6.151882
G02 X65.049078 Y15.862785 Z-0.125000 I48.112763 J5.546473
G02 X65.217213 Y20.428758 Z-0.125000 I62.082169 J-0.000000
G02 X65.594535 Y23.259118 Z-0.125000 I24.180656 J-1.783250
G02 X66.348467 Y26.030925 Z-0.125000 I19.308776 J-3.763555
G02 X67.170314 Y27.732985 Z-0.125000 I8.033385 J-2.829508
G02 X68.373653 Y29.148114 Z-0.125000 I5.650999 J-3.586075
G02 X69.645093 Y29.933850 Z-0.125000 I2.879431 J-3.237798
G02 X71.112467 Y30.430321 Z-0.125000 I5.330168 J-13.337162
G02 X72.746139 Y30.799761 Z-0.125000 I4.515856 J-16.172410
G01 X72.746139 Y31.846078 Z-0.125000
G03 X72.676229 Y34.149847 Z-0.125000 I-37.993322 J0.000000
G03 X72.513812 Y35.670515 Z-0.125000 I-16.696484 J-1.014277
G03 X72.203847 Y37.158658 Z-0.125000 I-12.595146 J-1.847091
G03 X71.867340 Y38.051767 Z-0.125000 I-4.842945 J-1.314784
G03 X71.375910 Y38.795837 Z-0.125000 I-3.078530 J-1.498933
G03 X70.897631 Y39.170238 Z-0.125000 I-1.200353 J-1.040699
G03 X70.314643 Y39.386807 Z-0.125000 I-1.219637 J-2.390212
G03 X69.715797 Y39.458875 Z-0.125000 I-0.598847 J-2.451997
G03 X69.018262 Y39.314359 Z-0.125000 I0.000000 J-1.755653
G03 X68.049113 Y38.737292 Z-0.125000 I1.748864 J-4.039452
G03 X67.201400 Y37.980818 Z-0.125000 I3.873526 J-5.193932
G03 X66.150098 Y36.716832 Z-0.125000 I9.885583 J-9.291387
G01 X66.049088 Y36.716832 Z-0.125000
G01 X66.049088 Y43.608027 Z-0.125000
G02 X66.636726 Y44.108150 Z-0.125000 I4.010266 J-4.116717
G02 X67.655168 Y44.798672 Z-0.125000 I8.702786 J-11.739338
G02 X68.748227 Y45.298385 Z-0.125000 I2.536679 J-4.103338
G02 X69.725902 Y45.448101 Z-0.125000 I0.977676 J-3.117364
G02 X70.849746 Y45.257893 Z-0.125000 I0.000000 J-3.415220
G02 X71.796631 Y44.726498 Z-0.125000 I-1.019839 J-2.926559
G02 X72.531737 Y43.926713 Z-0.125000 I-1.953834 J-2.533547
G02 X73.332003 Y42.345247 Z-0.125000 I-7.158423 J-4.615574
G02 X73.844200 Y40.654398 Z-0.125000 I-11.464429 J-4.395843
G02 X74.301712 Y38.051767 Z-0.125000 I-26.794090 J-6.051609
G02 X74.535824 Y35.411701 Z-0.125000 I-35.118237 J-4.444584
G02 X74.635049 Y31.521363 Z-0.125000 I-76.215663 J-3.890338
G01 X74.635049 Y4.172990 Z-0.125000
G01 X74.635049 Y4.172990 Z-0.125000
G00 Z5.000000

(End cutting path id: path4277)


(Start cutting path id: path4277)
(Change tool to Default tool)

G00 Z5.000000
G00 X72.746139 Y14.094885

G01 Z-0.125000 F100.0
G01 X72.746139 Y25.315656 Z-0.125000 F400.000000
G03 X71.883292 Y25.112310 Z-0.125000 I3.389790 J-16.316058
G03 X70.695611 Y24.774459 Z-0.125000 I8.251056 J-31.262226
G03 X69.592006 Y24.300410 Z-0.125000 I1.654621 J-5.373668
G03 X68.837003 Y23.728161 Z-0.125000 I1.715922 J-3.048106
G03 X68.173518 Y22.808031 Z-0.125000 I2.639802 J-2.602780
G03 X67.513751 Y21.130427 Z-0.125000 I8.341699 J-4.249152
G03 X67.168444 Y19.375785 Z-0.125000 I9.609236 J-2.802363
G03 X67.008696 Y16.331827 Z-0.125000 I28.921059 J-3.043958
G03 X67.200307 Y12.899104 Z-0.125000 I30.844525 J0.000000
G03 X67.594560 Y11.100281 Z-0.125000 I8.794196 J0.984834
G03 X68.450993 Y9.745621 Z-0.125000 I3.225568 J1.091189
G03 X69.382460 Y9.368459 Z-0.125000 I0.931467 J0.961629
G03 X70.224195 Y9.649004 Z-0.125000 I-0.000000 J1.403022
G03 X71.210767 Y10.739490 Z-0.125000 I-2.312223 J3.083411
G03 X71.963032 Y12.182379 Z-0.125000 I-13.634526 J8.026042
G03 X72.746139 Y14.094885 Z-0.125000 I-23.205773 J10.618569
G01 X72.746139 Y14.094885 Z-0.125000
G00 Z5.000000

(End cutting path id: path4277)


(Start cutting path id: path4275)
(Change tool to Default tool)

G00 Z5.000000
G00 X62.210660 Y4.172990

G01 Z-0.125000 F100.0
G01 X60.311645 Y4.172990 Z-0.125000 F400.000000
G01 X60.311645 Y27.119633 Z-0.125000
G03 X60.293335 Y29.717100 Z-0.125000 I-184.246429 J-0.000000
G03 X60.240936 Y32.134715 Z-0.125000 I-159.666122 J-2.251162
G03 X60.125530 Y34.547347 Z-0.125000 I-53.118466 J-1.331804
G03 X59.968208 Y35.995230 Z-0.125000 I-19.270371 J-1.361368
G03 X59.639955 Y37.514361 Z-0.125000 I-11.986357 J-1.794971
G03 X59.301534 Y38.340404 Z-0.125000 I-3.846010 J-1.093323
G03 X58.747110 Y38.931582 Z-0.125000 I-1.422274 J-0.778283
G03 X58.048991 Y39.134161 Z-0.125000 I-0.698119 J-1.101627
G03 X57.398688 Y38.883739 Z-0.125000 I-0.000000 J-0.969574
G03 X56.453011 Y37.690975 Z-0.125000 I3.102821 J-3.431326
G03 X55.728061 Y36.250205 Z-0.125000 I14.117938 J-8.006473
G03 X54.857036 Y34.083002 Z-0.125000 I31.127665 J-13.769219
G02 X54.882953 Y33.253066 Z-0.125000 I-78.452482 J-2.865251
G02 X54.907564 Y32.134715 Z-0.125000 I-142.431173 J-3.693914
G02 X54.922731 Y31.052274 Z-0.125000 I-115.893657 J-2.165166
G02 X54.927786 Y29.969927 Z-0.125000 I-115.868382 J-1.082347
G01 X54.927786 Y4.172990 Z-0.125000
G01 X53.028776 Y4.172990 Z-0.125000
G01 X53.028776 Y27.119633 Z-0.125000
G03 X53.010091 Y29.789263 Z-0.125000 I-190.727193 J-0.000000
G03 X52.958067 Y32.170792 Z-0.125000 I-151.832807 J-2.125429
G03 X52.842661 Y34.583425 Z-0.125000 I-53.118466 J-1.331804
G03 X52.685339 Y36.031307 Z-0.125000 I-19.270371 J-1.361368
G03 X52.354263 Y37.548412 Z-0.125000 I-11.604701 J-1.737797
G03 X52.018660 Y38.340404 Z-0.125000 I-3.459309 J-0.998766
G03 X51.464240 Y38.931582 Z-0.125000 I-1.422263 J-0.778268
G03 X50.766122 Y39.134161 Z-0.125000 I-0.698118 J-1.101621
G03 X50.127314 Y38.893998 Z-0.125000 I-0.000000 J-0.969661
G03 X49.200449 Y37.763130 Z-0.125000 I2.932309 J-3.348603
G03 X48.492613 Y36.359748 Z-0.125000 I13.988420 J-7.935663
G03 X47.644871 Y34.263407 Z-0.125000 I30.417393 J-13.520108
G01 X47.644871 Y4.172990 Z-0.125000
G01 X45.745860 Y4.172990 Z-0.125000
G01 X45.745860 Y44.473939 Z-0.125000
G01 X47.644871 Y44.473939 Z-0.125000
G01 X47.644871 Y40.000072 Z-0.125000
G02 X48.635517 Y42.587125 Z-0.125000 I32.648558 J-11.018742
G02 X49.412569 Y44.113147 Z-0.125000 I12.097441 J-5.199184
G02 X50.464767 Y45.303770 Z-0.125000 I3.748699 J-2.252620
G02 X51.301484 Y45.592410 Z-0.125000 I0.836717 J-1.068429
G02 X52.227658 Y45.240444 Z-0.125000 I-0.000000 J-1.394562
G02 X53.251002 Y43.860587 Z-0.125000 I-2.784376 J-3.134380
G02 X53.883641 Y42.077900 Z-0.125000 I-8.982094 J-4.191159
G02 X54.453037 Y39.062006 Z-0.125000 I-25.311327 J-6.340439
G02 X55.734290 Y42.464523 Z-0.125000 I44.048339 J-14.644363
G02 X56.554073 Y44.040992 Z-0.125000 I10.214930 J-4.310502
G02 X57.675838 Y45.285018 Z-0.125000 I3.892910 J-2.382549
G02 X58.584400 Y45.592410 Z-0.125000 I0.908562 J-1.189027
G02 X59.886428 Y44.901778 Z-0.125000 I0.000000 J-1.572654
G02 X61.321807 Y41.551490 Z-0.125000 I-7.962762 J-5.394149
G02 X61.926566 Y37.515493 Z-0.125000 I-28.611385 J-6.350474
G02 X62.210707 Y30.330719 Z-0.125000 I-90.694948 J-7.184774
G01 X62.210707 Y4.172990 Z-0.125000
G01 X62.210660 Y4.172990 Z-0.125000
G00 Z5.000000

(End cutting path id: path4275)


(Start cutting path id: path4273)
(Change tool to Default tool)

G00 Z5.000000
G00 X36.028526 Y6.698570

G01 Z-0.125000 F100.0
G02 X35.009625 Y5.127183 Z-0.125000 I-17.550548 J10.263904 F400.000000
G02 X34.220420 Y4.172990 Z-0.125000 I-7.227105 J5.174009
G02 X33.283245 Y3.476180 Z-0.125000 I-2.420804 J2.277228
G02 X32.412320 Y3.271002 Z-0.125000 I-0.870925 J1.745831
G02 X31.326126 Y3.555806 Z-0.125000 I-0.000000 J2.213673
G02 X30.169867 Y4.533782 Z-0.125000 I1.975561 J3.508213
G02 X29.329580 Y5.923919 Z-0.125000 I5.243342 J4.118439
G02 X28.422369 Y8.430393 Z-0.125000 I16.382717 J7.347093
G02 X27.823557 Y11.054636 Z-0.125000 I24.796372 J7.038594
G02 X27.280942 Y14.996874 Z-0.125000 I55.505476 J9.648313
G02 X26.992268 Y18.971496 Z-0.125000 I68.471498 J6.970829
G02 X26.876897 Y24.269339 Z-0.125000 I121.580596 J5.297843
G02 X27.355409 Y34.091894 Z-0.125000 I101.054329 J-0.000000
G02 X28.392068 Y39.783590 Z-0.125000 I34.807420 J-3.399403
G02 X30.622166 Y44.490771 Z-0.125000 I14.212381 J-3.851470
G02 X32.412320 Y45.412023 Z-0.125000 I1.790153 J-1.278663
G02 X33.291161 Y45.199757 Z-0.125000 I0.000000 J-1.925459
G02 X34.311330 Y44.437861 Z-0.125000 I-1.743055 J-3.397873
G02 X35.173110 Y43.406390 Z-0.125000 I-6.796300 J-6.553956
G02 X36.028526 Y42.056610 Z-0.125000 I-10.824773 J-7.806088
G01 X36.028526 Y34.515967 Z-0.125000
G01 X35.927511 Y34.515967 Z-0.125000
G03 X34.938285 Y36.870083 Z-0.125000 I-22.759063 J-8.178717
G03 X34.129511 Y38.232172 Z-0.125000 I-8.378167 J-4.053583
G03 X33.084338 Y39.287554 Z-0.125000 I-3.698242 J-2.617244
G03 X32.331511 Y39.531030 Z-0.125000 I-0.752828 J-1.042134
G03 X31.197597 Y38.918679 Z-0.125000 I-0.000000 J-1.356031
G03 X29.775922 Y35.634438 Z-0.125000 I8.744613 J-5.735173
G03 X29.151450 Y31.737732 Z-0.125000 I24.836469 J-5.978596
G03 X28.846621 Y24.269339 Z-0.125000 I91.336365 J-7.468393
G03 X29.140023 Y17.014727 Z-0.125000 I89.834876 J0.000000
G03 X29.755721 Y13.048587 Z-0.125000 I27.363031 J2.216941
G03 X31.169496 Y9.776793 Z-0.125000 I9.894125 J2.334000
G03 X32.331511 Y9.151976 Z-0.125000 I1.162015 J0.768130
G03 X32.862217 Y9.268617 Z-0.125000 I-0.000000 J1.265656
G03 X33.503239 Y9.693173 Z-0.125000 I-1.062581 J2.300560
G03 X34.041260 Y10.280047 Z-0.125000 I-2.927912 J3.224238
G03 X34.573963 Y11.100281 Z-0.125000 I-5.230205 J3.979868
G03 X34.970798 Y11.866446 Z-0.125000 I-16.951586 J9.265923
G03 X35.351747 Y12.687776 Z-0.125000 I-19.101213 J9.358528
G03 X35.703806 Y13.558118 Z-0.125000 I-32.780329 J13.766245
G03 X35.927511 Y14.167040 Z-0.125000 I-15.818510 J6.156935
G01 X36.028526 Y14.167040 Z-0.125000
G01 X36.028526 Y6.698570 Z-0.125000
G01 X36.028526 Y6.698570 Z-0.125000
G00 Z5.000000

(End cutting path id: path4273)


(Start cutting path id: path4271)
(Change tool to Default tool)

G00 Z5.000000
G00 X24.028379 Y4.172990

G01 Z-0.125000 F100.0
G01 X22.129369 Y4.172990 Z-0.125000 F400.000000
G01 X22.129369 Y27.119633 Z-0.125000
G03 X22.105067 Y29.897316 Z-0.125000 I-158.759466 J-0.000000
G03 X22.038454 Y32.315102 Z-0.125000 I-120.348287 J-2.105956
G03 X21.886578 Y34.762038 Z-0.125000 I-49.100258 J-1.819368
G03 X21.705117 Y36.139558 Z-0.125000 I-15.721356 J-1.370262
G03 X21.345015 Y37.612736 Z-0.125000 I-10.034545 J-1.672232
G03 X20.977836 Y38.376482 Z-0.125000 I-3.020740 J-0.982120
G03 X20.400539 Y38.948899 Z-0.125000 I-1.511561 J-0.947128
G03 X19.745499 Y39.134161 Z-0.125000 I-0.655040 J-1.065398
G03 X19.099233 Y38.898093 Z-0.125000 I-0.000000 J-1.002652
G03 X18.119217 Y37.763130 Z-0.125000 I3.069733 J-3.641238
G03 X17.357168 Y36.350100 Z-0.125000 I11.461059 J-7.092970
G03 X16.492936 Y34.263407 Z-0.125000 I24.192198 J-11.241840
G01 X16.492936 Y4.172990 Z-0.125000
G01 X14.593920 Y4.172990 Z-0.125000
G01 X14.593920 Y44.473939 Z-0.125000
G01 X16.492936 Y44.473939 Z-0.125000
G01 X16.492936 Y40.000072 Z-0.125000
G02 X17.500927 Y42.576639 Z-0.125000 I27.652083 J-9.332454
G02 X18.331343 Y44.113147 Z-0.125000 I10.617775 J-4.745792
G02 X19.436136 Y45.308205 Z-0.125000 I3.921559 J-2.517152
G02 X20.280861 Y45.592410 Z-0.125000 I0.844725 J-1.113262
G02 X21.581293 Y44.920247 Z-0.125000 I0.000000 J-1.594052
G02 X23.068771 Y41.659740 Z-0.125000 I-7.794059 J-5.525289
G02 X23.717272 Y37.689645 Z-0.125000 I-25.266211 J-6.165163
G02 X24.028379 Y30.330719 Z-0.125000 I-86.878616 J-7.358926
G01 X24.028379 Y4.172990 Z-0.125000
G01 X24.028379 Y4.172990 Z-0.125000
G00 Z5.000000

(End cutting path id: path4271)


(Start cutting path id: path4269)
(Change tool to Default tool)

G00 Z5.000000
G00 X12.149448 Y6.698570

G01 Z-0.125000 F100.0
G02 X11.130548 Y5.127182 Z-0.125000 I-17.550808 J10.264056 F400.000000
G02 X10.341347 Y4.172990 Z-0.125000 I-7.227178 J5.174046
G02 X9.404167 Y3.476179 Z-0.125000 I-2.420818 J2.277255
G02 X8.533241 Y3.271002 Z-0.125000 I-0.870926 J1.745837
G02 X7.447048 Y3.555807 Z-0.125000 I0.000000 J2.213670
G02 X6.290791 Y4.533782 Z-0.125000 I1.975559 J3.508204
G02 X5.450506 Y5.923919 Z-0.125000 I5.243354 J4.118440
G02 X4.543296 Y8.430393 Z-0.125000 I16.382770 J7.347108
G02 X3.944483 Y11.054636 Z-0.125000 I24.796346 J7.038592
G02 X3.401868 Y14.996874 Z-0.125000 I55.505415 J9.648307
G02 X3.113194 Y18.971496 Z-0.125000 I68.471498 J6.970829
G02 X2.997823 Y24.269339 Z-0.125000 I121.580596 J5.297843
G02 X3.476335 Y34.091894 Z-0.125000 I101.054433 J-0.000000
G02 X4.512992 Y39.783590 Z-0.125000 I34.807451 J-3.399403
G02 X6.743090 Y44.490771 Z-0.125000 I14.212390 J-3.851471
G02 X8.533241 Y45.412023 Z-0.125000 I1.790152 J-1.278661
G02 X9.412083 Y45.199758 Z-0.125000 I-0.000000 J-1.925465
G02 X10.432257 Y44.437861 Z-0.125000 I-1.743065 J-3.397902
G02 X11.294033 Y43.406391 Z-0.125000 I-6.796364 J-6.553982
G02 X12.149448 Y42.056610 Z-0.125000 I-10.824914 J-7.806166
G01 X12.149448 Y34.515967 Z-0.125000
G01 X12.048438 Y34.515967 Z-0.125000
G03 X11.059208 Y36.870084 Z-0.125000 I-22.759476 J-8.178913
G03 X10.250438 Y38.232172 Z-0.125000 I-8.378283 J-4.053639
G03 X9.205261 Y39.287555 Z-0.125000 I-3.698258 J-2.617270
G03 X8.452432 Y39.531030 Z-0.125000 I-0.752828 J-1.042138
G03 X7.318520 Y38.918679 Z-0.125000 I-0.000000 J-1.356029
G03 X5.896847 Y35.634438 Z-0.125000 I8.744620 J-5.735171
G03 X5.272373 Y31.737732 Z-0.125000 I24.836403 J-5.978597
G03 X4.967543 Y24.269339 Z-0.125000 I91.336108 J-7.468393
G03 X5.260945 Y17.014727 Z-0.125000 I89.834722 J-0.000000
G03 X5.876645 Y13.048587 Z-0.125000 I27.362989 J2.216941
G03 X7.290420 Y9.776792 Z-0.125000 I9.894152 J2.334012
G03 X8.452432 Y9.151976 Z-0.125000 I1.162012 J0.768128
G03 X8.983139 Y9.268617 Z-0.125000 I0.000000 J1.265662
G03 X9.624166 Y9.693173 Z-0.125000 I-1.062592 J2.300594
G03 X10.162183 Y10.280046 Z-0.125000 I-2.927945 J3.224246
G03 X10.694885 Y11.100281 Z-0.125000 I-5.230297 J3.979919
G03 X11.091721 Y11.866446 Z-0.125000 I-16.952585 J9.266468
G03 X11.472674 Y12.687776 Z-0.125000 I-19.102401 J9.359172
G03 X11.824730 Y13.558117 Z-0.125000 I-32.786637 J13.768698
G03 X12.048438 Y14.167040 Z-0.125000 I-15.821671 J6.158166
G01 X12.149448 Y14.167040 Z-0.125000
G01 X12.149448 Y6.698570 Z-0.125000
G01 X12.149448 Y6.698570 Z-0.125000
G00 Z5.000000

(End cutting path id: path4269)


(Footer)
M5
G00 X0.0000 Y0.0000
M2
(Using default footer. To add your own footer create file "footer" in the output dir.)
(end)
%

ngc1300

  • Administrador
  • Usuario de CNCs
  • *****
  • Mensajes: 2869
  • Karma: +45/-2
    • Ver Perfil
    • cncControl
  • Ubicación: Terrassa
Re:Tema Movido de Programas de diseño CAD/CAM: Como crear letras bajo relieve
« Respuesta #19 en: Junio 24, 2015, 05:47:46 pm »
me sale perfectamente, tienes configurados los limites de la maquina? que sistema operativo tienes?


Gabrielle2015

  • Nuevo
  • *
  • Mensajes: 48
  • Karma: +0/-0
    • Ver Perfil
  • Ubicación: italia
Re:Tema Movido de Programas de diseño CAD/CAM: Como crear letras bajo relieve
« Respuesta #20 en: Junio 24, 2015, 06:03:10 pm »
estoy usando el windows 7 a 64 bits, y no e configurado los limites de la maquina aun, desinstale ell inkscape y lo instalare de nuevo para ver si asi logro generar otro codigo.

ngc1300

  • Administrador
  • Usuario de CNCs
  • *****
  • Mensajes: 2869
  • Karma: +45/-2
    • Ver Perfil
    • cncControl
  • Ubicación: Terrassa
Re:Tema Movido de Programas de diseño CAD/CAM: Como crear letras bajo relieve
« Respuesta #21 en: Junio 24, 2015, 06:18:10 pm »
yo tengo el mismo sistema operativo, puedes enviarme por email el archivo de log a ver si sale algún error?

Gabrielle2015

  • Nuevo
  • *
  • Mensajes: 48
  • Karma: +0/-0
    • Ver Perfil
  • Ubicación: italia
Re:Tema Movido de Programas de diseño CAD/CAM: Como crear letras bajo relieve
« Respuesta #22 en: Junio 24, 2015, 06:35:10 pm »
no logro hacerlo,no se a que te refieres con el log?
se guarda el code g ,pero cuando lo abro con la cnc no se visualiza.
en suma es este el mejor programa el inskcape para generar codigos?
o hay otros con los que pueda seguir probando,porque este me esta dando problemas

ngc1300

  • Administrador
  • Usuario de CNCs
  • *****
  • Mensajes: 2869
  • Karma: +45/-2
    • Ver Perfil
    • cncControl
  • Ubicación: Terrassa
Re:Tema Movido de Programas de diseño CAD/CAM: Como crear letras bajo relieve
« Respuesta #23 en: Junio 24, 2015, 07:12:03 pm »
El hecho que que no salga el dibujo en cnccontrol no es por que inkscape lo haga mal, debe haber alguna incompatibilidad con el java y el opengl. Es probable que con cualquier otro programa de generación de gcodes te pasara lo mismo.

Programas para generar gcodes hay muchos, artcam, cambam, etc.

El log es un archivo que se guarda en la carpeta del programa cncControl, si me lo envías puedo ver si hay algún error en el opengl.

Gabrielle2015

  • Nuevo
  • *
  • Mensajes: 48
  • Karma: +0/-0
    • Ver Perfil
  • Ubicación: italia
Re:Tema Movido de Programas de diseño CAD/CAM: Como crear letras bajo relieve
« Respuesta #24 en: Junio 24, 2015, 07:52:50 pm »
############################################################
#     Default Logging Configuration File
#
# You can use a different file by specifying a filename
# with the java.util.logging.config.file system property. 
# For example java -Djava.util.logging.config.file=myfile
############################################################

############################################################
#     Global properties
############################################################

# "handlers" specifies a comma separated list of log Handler
# classes.  These handlers will be installed during VM startup.
# Note that these classes must be on the system classpath.
# By default we only configure a ConsoleHandler, which will only
# show messages at the INFO and above levels.
handlers= java.util.logging.ConsoleHandler

# To also add the FileHandler, use the following line instead.
#handlers= java.util.logging.FileHandler, java.util.logging.ConsoleHandler

# Default global logging level.
# This specifies which kinds of events are logged across
# all loggers.  For any given facility this global level
# can be overriden by a facility specific level
# Note that the ConsoleHandler also has a separate level
# setting to limit messages printed to the console.
.level= INFO

############################################################
# Handler specific properties.
# Describes specific configuration info for Handlers.
############################################################

# default file output is in user's home directory.
java.util.logging.FileHandler.pattern = %h/java%u.log
java.util.logging.FileHandler.limit = 50000
java.util.logging.FileHandler.count = 1
java.util.logging.FileHandler.formatter = java.util.logging.XMLFormatter

# Limit the message that are printed on the console to INFO and above.
java.util.logging.ConsoleHandler.level = INFO
java.util.logging.ConsoleHandler.formatter = java.util.logging.SimpleFormatter

# Example to customize the SimpleFormatter output format
# to print one-line log message like this:
#     <level>: <log message> [<date/time>]
#
# java.util.logging.SimpleFormatter.format=%4$s: %5$s [%1$tc]%n

############################################################
# Facility specific properties.
# Provides extra control for each logger.
############################################################

# For example, set the com.xyz.foo logger to only log SEVERE
# messages:
com.xyz.foo.level = SEVERE

ngc1300

  • Administrador
  • Usuario de CNCs
  • *****
  • Mensajes: 2869
  • Karma: +45/-2
    • Ver Perfil
    • cncControl
  • Ubicación: Terrassa
Re:Tema Movido de Programas de diseño CAD/CAM: Como crear letras bajo relieve
« Respuesta #25 en: Junio 25, 2015, 02:39:05 pm »
ese no es el log, el fichero de log se encuentra en la carpeta donde esta el ejecutable del programa y se llama cnc.log envíamelo por correo a cnccontroldev@gmail.com

Gabrielle2015

  • Nuevo
  • *
  • Mensajes: 48
  • Karma: +0/-0
    • Ver Perfil
  • Ubicación: italia
Re:Tema Movido de Programas de diseño CAD/CAM: Como crear letras bajo relieve
« Respuesta #26 en: Junio 25, 2015, 02:57:53 pm »
si me aparece ese archivo pero tiene 0 bytes, te lo mande no se si es ese,algo no va